ATI MX200C Nanoamp 3-Ch Mic/Line Stereo Field Mixer w/Limiter

Product Description

NanoAmps from ATI are a compact, convenient and rugged series of low cost mixers and utility amplifiers featuring professional XLR type connectors, high performance, low noise circuitry and quiet, UL and CE approved remote power modules. Use them free standing, stack them or rack mount one, two, or three across in only 1-3/4 inches of vertical rack space. The MX200 and MX200C are basic studio or field three channel mixers with stereo outputs; the C version includes a switchable peak limiter.

Features

• Three XLR low noise, switchable microphone or line balanced inputs with phantom power and pan pots
• Balanced line level stereo outputs have independent headphone program monitoring and bright LED bargraph VU meters
• The MX200C also includes a switchable peak limiter
• VCA master gain and headphone controls
• Quick change AC line operated supplies are standard; replaceable and rechargeable battery power packs and DC set-up converters for belt packs are available
• Expand the MXS100, MX200 or MX200C mixer with an XPS100 to add four switchable microphone/line inputs with pan pots or combine with the XPS200 to add two stereo line level inputs
• Use multiple input expanders to precisely meet your requirements
• Expanders include all audio and DC interconnects

Specifications

• OUTPUT LEVEL: +22dBm MAX, +4dBm Nominal into 600 ohm balanced or unbalanced lines; output is selectable +4dBm (Line) or -50dBm (Mic)
• FREQUENCY RESPONSE: +0/-0.3dB, 20Hz to 20kHz
• DISTORTION: .5% Maximum, 20Hz to 20kHz at +20dBm
• NOISE: MIC Input: EIN = -126dBm; Line: EIN = -86dBm; 20Hz to 20kHz measurement bandwidth
• GAIN: Mic inputs: +82dB Max; Line Inputs: +42dB Max
• HEADPHONE OUTPUT: 100mW to 600/150 Ohm phones, 1/4 inch TRS (stereo) jack
• LIMITER: 5:1 slope, Attack time 25ms, Recovery time 200ms for 10dB change (MXS100 and MX200C only)
• PHANTOM POWER: +24VDC nominal @ 4ma through paralleled 6.8K ohm resistors; PH48-1 48VDC phantom power is available as an option (please specify)
• POWER: 22 to 30 VDC, 24VDC nominal; MX @ 160 mA, XP @ 100 mA; See Accessories for other DC voltage options
• DIMENSIONS: 1.75" (4.45cm) H x 5.6" (14.22cm) W x 5.75" (14.6cm) D; 1.25 lbs. (.57kg)
• MOUNTING: Free standing or rack mountable: one, two or three units in 1RU (1-3/4")
• CONNECTORS: Standard XLR female inputs and XLR male outputs
• TAPE: Monitor input and tape output, 3.5mm stereo mini jacks (MXS100 only)
• POWER SUPPLIES:
  • WA100-1 Wall mount power supply (UL, CSA), 24VDC @ .4amp, 115 VAC/60 Hz
  • WA100-2 Table top power supply with IEC 320 AC connector, 24 VDC @ .4amp, 230/50 Hz
• REMOTE POWER PACKS:
  • PPA-1 Rechargeable battery pack (includes charger)
  • PPA-2 Rechargeable battery pack, mounts directly to the base of the NanoAmp mixer
  • DCA100-1 DC/DC converter for operation with DC inputs from 6 to 18VDC
  • BBU100-1 Battery pack, houses four 9V alkaline batteries for remote operation
• FIELD ACCESSORIES:
  • ABAG-1 Carry Case (includes PROK-1), houses Mixer with PPA-1,-2,-3 or DCA100-1
  • PROK-1 Unit protection kit containing side plates to protect front panel controls and rear connectors from impact damage; includes slide-out brackets for BBU
• RACK MOUNT KITS: 21075-501 1U Rack Mount Shelf, holds up to 3 NanoAmp units
• DESK MOUNT KITS:
  • 20617-501 Angled desk mount base
  • 20617-502 Angled desk mount base and one stacker, holds 2 NanoAmps
  • 20617-503 Angled desk mount base and two stackers, holds 3 NanoAmps
  • 20617-504 Stacker only, holds 2 NanoAmps
  • 20617-505 Horizontal joiner, holds 2 NanoAmps side-by-side
• WARRANTY: Limited One Year Warranty

For more information on this product, please visit the ATI Audio website.

Can't find what you're looking for?
We sell this manufacturer's entire product line!
Call 1(800)433-2105 or email sales@proaudio.com for a quick quote.