Meyer Sound MINA Ultra-Compact Curvilinear Array Module

Product Description

With the introduction of MILO in 2003, Meyer Sound started the most accurate, flexible, and usable family of line array products on the market. The subsequent introductions of MICA and M'elodie to the MILO family brought MILO's renowned sonic signature, self-powering, and high power-to-size ratio to more compact packages, each time satisfying yet more applications and winning more acclaim and awards.

Now, Meyer Sound introduces MINA, the newest and smallest member of the MILO family. Just over a foot and a half long and weighing only 47 lbs yet capable of producing up to 128 dB SPL over its wide 100-degree horizontal coverage area, MINA will find a place in a variety of applications. Its small footprint makes it an ideal curvilinear array system for low-profile, high-fidelity sound reinforcement, as well as frontfill and under-balcony applications. Installations and theatre tours, where size is a concern, can pose tough challenges to attaining excellent coverage, but MINA rises to the challenge easily. Optional weather protection, custom color cabinets and low-profile rigging pins ensure that MINA will blend into any environment to deliver even coverage and pristine sound.

Features

• Very small footprint and narrow width ideal for small venues or fill applications
• Exceptional fidelity and transient response for intelligibility and high impact
• Extremely high power-to-size ratio
• Flexible mounting options
• Wide and even horizontal coverage pattern
• Seamless integration with M'elodie and MICA
• QuickFly rigging with captive GuideALinks simplifies use in flown or groundstacked arrays, alone or with M'elodie and/or 500-HP subwoofer

Applications

• Smaller theatres
• Houses of worship
• Ballrooms
  
• Corporate AV
  
• Theme Parks
  
• Downfill or sidefill in systems using M'elodie and MICA
  
• Frontfill and under-balcony applications
  
• Touring theatrical productions

Specifications

ACOUSTICAL

• Operating frequency range 1 70 Hz - 18 kHz
• Maximum peak SPL 2 128 dB
• Horizontal coverage 100°
• Vertical coverage Varies, depending on array length and configuration

TRANSDUCERS

• Low/low-mid frequency3
  
  • Two 6.5" cone drivers with neodymium magnets
  • Nominal impedance: 4 Ω
  • Voice coil size: 1.5"
• High frequency4
  
  • 3" compression driver
  • Nominal impedance: 8 Ω
  • Voice coil size: 3"
  • Diaphragm size: 3"
  • Exit size: 1.2"

AUDIO INPUT

• Type Differential, electronically balanced
• Connectors Female XLR input with male XLR loop output
• Input impedance 10 kΩ differential between pins 2 and 3
• Wiring
  
  • Pin 1: Chassis/earth through 220 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies
  • Pin 2: Signal +
  • Pin 3: Signal -
• Case: Earth ground and chassis
• Nominal input sensitivity 0 dB V (1 V rms, 1.4 V pk) continuous is typically the onset of limiting for noise and music.
• Input level
  
  • Audio source must be capable of producing +20 dBV (10 V rms, 14 V pk) into 600 Ω in order to produce maximum peak
  • SPL over the operating bandwidth of the loudspeaker

AMPLIFIERS

• Amplifier type Three-channel class D amplifier
• Output power 5 950 W (three channels; 2 x 380 W, 1 x 190 W); 1900 W peak
• THD, IM TIM < .02%
• Load capacity 4 Ω low and mid; 8 Ω high channel
• Cooling Convection cooled

AC POWER

• AC power connector PowerCon with looping output
• Voltage selection Automatic
• Safety agency rated operating voltage 100 V AC -240 V AC, 50/60 Hz
• Turn on/turn off points 90 V AC - 264 V AC, 50/60 Hz
• Avg Current Draw 3 A rms (115 V AC), 1.5 A rms (230 V AC), 3.5 A rms (100 V AC)

For more information on this product, please visit the Meyer Sound website.

Can't find what you're looking for?
We sell this manufacturer's entire product line!
Call 1(800)433-2105 or email sales@proaudio.com for a quick quote.